Datasheet4U Logo Datasheet4U.com

DS1672 - I2C 32-Bit Binary Counter RTC

General Description

The DS1672 incorporates a 32-bit counter and power-monitoring functions.

The 32-bit counter is designed to count seconds and can be used to derive time-of-day, week, month, month, and year by using a software algorithm.

Key Features

  • 32-Bit Counter.
  • I2C Serial Interface.
  • Automatic Power-Fail Detect and Switch Circuitry.
  • Power-Fail Reset Output.
  • Low-Voltage Oscillator Operation (1.3V min).
  • Trickle-Charge Capability.
  • Underwriters Laboratories (UL) Recognized.
  • -40°C to +85°C Ope.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS1672 Low Voltage Serial Timekeeping Chip Dallas Semiconductor
DS1670 Portable System Controller Dallas Semiconductor
DS1673 Portable System Controller Dallas Semiconductor
DS1677 Portable System Controller Dallas Semiconductor
DS1678 TRI-STATE TTL to MOS Multiplexers/Drivers National Semiconductor

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
DS1678 Real-Time Event Recorder
DS1602 Elapsed Time Counter
DS1603 Elapsed Time Counter
DS1620 Digital Thermometer/Thermostat
DS1621 Digital Thermometer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-6032; Rev 9/11 DS1672 I2C 32-Bit Binary Counter RTC GENERAL DESCRIPTION The DS1672 incorporates a 32-bit counter and power-monitoring functions. The 32-bit counter is designed to count seconds and can be used to derive time-of-day, week, month, month, and year by using a software algorithm. A precision, temperature-compensated reference and comparator circuit monitors the status of VCC. When an out-of-tolerance condition occurs, an internal power-fail signal is generated that forces the reset to the active state. When VCC returns to an in-tolerance condition, the reset signal is kept in the active state for a period of time to allow the power supply and processor to stabilize.